Yale 6300 is a control panel operated system ideal for a flat, terraced, or semi-detached and detached home. An access code on the control panel can be used to enable and disable the alarm. This alarm has a wireless range of 30 metre. It uses easy to use alkaline batteries and average battery life is over 2 years. Up to 20 devices can be connected to this alarm system. This system can be programmed to two zones allowing the user a fully armed or part set option.
20 additional devices can be added including:
- PET friendly PIR sensors
- Linked smoke alarms
- Remote Keyfobs
- Additional PIR sensors
- Additional door/window contacts
- System can be expanded anytime in the future
Our installers on arrival for installation may recommend further addition of PIRs or door contacts or other security devices to ensure all parts of your property is protected to adequate levels.
Flats and Apartments
Small to Medium Offices
All types of houses
will call to
arrange fitting date
Home Security Survey
The Yale siren will sound when triggered for a pre-selected time of 4 or 10 minutes, chosen by you. The system will automatically be re-armed again after this time period has elapsed.
It is possible to have several sirens, yes. However, only one unit can be programmed with a siren-based alarm. Separate sirens can be purchased by calling us on 0800 193 8727 or from our installers at the time of installation and ‘dummy’ boxes are also available.
The Yale 6300 Burglar Alarm siren uses standard, non-rechargeable, D-type alkaline batteries. It is not solar powered and does not require power supply.
Siren batteries should be refreshed every 12 - 16 months. The unit will ’beep’ five times when arming the system to inform you that the battery power is too low. Please call us when this happens and we can book a service for you. Further details are to be found in the manual.
Yale 6300 Burglar Alarm requires a plug socket in the hallway for power supply for the control panel. If this is not available, you can place the panel in another room and add an additional keypad to the alarm package for a n additional fee. If a plug socket is not near the location of the panel, we can also supply and run additional cables to the location of the panel at an additional fee of £25- £50, depending on the length of the cable and work involved.