Pet Friendly Yale 6300 is a control panel operated system ideal for a flat, terraced, or semi-detached and detached home. . This pet friendly Yale 6300 alarm works with pets up to 26 kilograms (57 lbs) weight. An access code on the control panel can be used to enable and disable the alarm. This alarm has a wireless range of 30 metre. It uses easy to use alkaline batteries and average battery life is over 18 months . Up to 20 devices can be connected to this alarm system. This system can be programmed to two zones allowing the user a fully armed or part set option. Very loud live siren with 115 dB.
20 additional devices can be added including:
- PET friendly PIR sensors
- Linked smoke alarms
- Remote Keyfobs
- Additional PIR sensors
- Additional door/window contacts
- System can be expanded anytime in the future
Our installers on arrival for installation may recommend further addition of PIRs or door contacts or other security devices to ensure all parts of your property is protected to adequate levels.
All types of houses
Small to Medium Offices
Flats and Apartments
will call to
arrange fitting date
Home Security Survey
This pet friendly Yale 6300 alarm works with pets up to 26 kilograms (57 lbs) weight.
Yale 6300 is a very easy to use and user friendly alarm. It can be operated in the following options. 1 When the system is disarmed (alarm off), press the arm key on the Yale 6400 control unit, keypad or keyfob. 2 The control unit will start its countdown. 3 When the exit delay time is up, the control unit will sound a long beep. The siren will beep once and the strobe will flash once after the exit delay has expired. ‘Alarm on’ will be displayed on the screen and the system is now in away armed.
The Yale 6300 siren will sound when triggered for a pre-selected time of 4 or 10 minutes, chosen by you. The system will automatically be re-armed again after this time period has elapsed.
It is possible to have several sirens, yes. However, only one unit can be programmed with a siren-based alarm. Separate sirens can be purchased by calling us on 0800 193 8727 or from our installers at the time of installation and ‘dummy’ boxes are also available.
The Yale Burglar Alarm siren uses standard, non-rechargeable, D-type alkaline batteries. It is not solar powered and does not require electric supply.
Yale siren and sensor batteries should be refreshed every 12 - 16 months. The unit will ’beep’ five times when arming the system to inform you that the battery power is too low. Please call us when this happens and we can book a service for you. Further details are to be found in the manual.
It doesn't. If you need an alarm for insurance purposes this one's not for you. If you're not doing it for insurance then it really is excellent alarm system and well worth the money. We do have a range of alarms that comply with EN60131 standard, please get in touch and we can help you choose one.
Yale 6300 Burglar Alarm requires a plug socket in the hallway for power supply for the control panel. If this is not available, you can place the panel in another room and add an additional keypad to the alarm package for a n additional fee. If a plug socket is not near the location of the panel, we can also supply and run additional cables to the location of the panel at an additional fee of £25- £50, depending on the length of the cable and work involved.